| | Advanced Ring Grip for DJI RoninArtist $15 day
(Cultural $20 day)
The Advanced Ring Grip for RS 2 allows you more flexibility when powering your gimbal, mounting accessories, controlling wireless follow focus motors and operating the gimbal body.
The system allows you to power the RS 2 with either a V-Mount Battery or the RS 2’s Battery Handle. The Advanced RIng Grip allows you to mount the RS 2’s Battery Handle to the top of the ring which doubles as a power source and top handle. This can be used in combination with a V-Mount Battery Plate, which gives you more flexibility and longer battery life on set.
The Right Side Control Handle allows you to control the movement of the Gimbal Head and offers camera control through the RS 2’s camera control ports. A single finger wheel allows you to control a DJI Focus Motor or our Tilta Nucleus M and Nano.
The Left Side Focus Handle offers the same wireless follow focus capabilities, but with two finger wheels, allowing for simultaneous control of Focus, Iris, Zoom, and the Gimbal Head, all with only a single operator.
|
| | | | |
|
| | DVTec Shoulder Rig
* This rig doesn’t come with the waist support
Padded shoulder brace for a comfortable operating experience
Mounting point at back of shoulder for battery plate
Various mounting points along rig for ¼” screws to mount video monitoring/wireless feed/small light/microphone
|
| | Dana Dolly with universal track ends -Artist $50 day
(Cultural $75 day)
Designed for the times where you just want to do a little dolly move without a lot of setup. The Dana Dolly is easy to set up, can be used with a variety of track options, and can be supported using standard junior stands, apple boxes, or the ground, whatever the shot requires.
Works with any size pipe from just under 1 1/4" (1.66" O.D.) to 1 1/2" (1.90" O.D.)
Pipe needs to be rented separately
|
| | Dana Dolly with universal track ends - One DaArtist $75 day
Designed for the times where you just want to do a little 4' to 8' dolly move without a lot of setup. The Dana Dolly is easy to set up, can be used with a variety of track options, and can be supported using standard junior stands, apple boxes, or the ground, whatever the shot requires.
Whether you're an established professional or just getting started, the Dana Dolly is a great solution for adding production value to your shoot. It's designed to be flexible, affordable, and easy to set up. Designed by a key grip with over 20 years' experience in all types of production, the design is both simple and practical. The Mitchell Mount can take all types of camera heads with available adapters. The sixteen-wheel design with floating trucks provides a smooth glide. The track ends and center support can use any 1 1/4" pipe as a track: aluminum, stainless steel, etc.
Pipe must be rented separately.
|
|
|
| | | | Flowline Steady Camera Support w Serene ArmArtist $90 day
(Cultural $150 day)
Flowline Steady Camera Support offers the versatility and mobility of handheld filming alongside perfect balance, stability and complete strain relief. With strong and resistant marlow rope, the Flowline supports gimbals and cameras weighing up to 39.6 lbs=18kg. Whether used in the hand-free function, or when mounting a gimbal on the rope, this product provides amazing action shots and great angles while maintaining perfect stability.
The Flowline's redesigned comfortable vest and support belt transfer the weight from the operator's arms to the hips, thus relieving the strain in long shooting days. In addition, in order to achieve better balance a length adjustment knob enables the operator to set the precise height for the support bar.
The Serene Arm attachment is a two axis spring arm that helps take the “step” out of walking shots. The arm helps stabilize up and down motions as well as side to side. The Serene Arm & EasyRig combo is popularly paired with the DJI Ronin for ultimate stabilization. It can also be used with our Mantis Handheld rig.
|
| | |
|
| | | | | | |
|
| | | | Mantis Handheld Rig for EpicArtist $20 day
(Cultural $30 day)
The industry's most configurable and innovative shoulder mounting solution for film and digital motion picture cameras.
Fully compatible with the RED One of today, as well as the Scarlett and Epic of tomorrow.
Element's hand-held system combines innovative design with exceptional workmanship and materials.
Features
Dovetail interface allows quick setup; 20 seconds from tripod to hand held
Multi axis adjustment allows shoulder pad to conform to any shoulder
Two axis (rotational) adjustment shoulder pad
Fore/aft linear adjustment shoulder pad
Designed specifically for Arriflex style Hybrid bridge plates (435, Arricam, Moviecam, Phantom, etc.)
Utilizes conventional bicycle grips (use ours or bring your own)
Telescopic and rotating handle extensions
Handles and extensions use Arriflex compatible rosettes
Mounting point for ViewFactor Origo remote start/stop button
Available as a system or a la carte
RED One owners will need the Element's Arri-Style Hybrid Base from RED.com or similar Arri compatible bridge plate.
|
| | Mobifoto Smartphone Video RigArtist $2 day
(Cultural $4 day)
Take your everyday footage to new heights with the Mobifoto Pro vlogging rig for smartphones (smartphone not included). The phone holder is built from ultra-stong aerospace aluminum and equipped with dual rubber handles to ensure a slip-free grip.
- Designed for use with most smartphones up to 9.4cm x 4.3cm
- Aerospace aluminum construction is both lightweight and durable
- Dual rubber handles provide a secure grip without slipping
- easy to connect tripods, sliders, shotgun mics or small lights (rented separately)
|
|
|
OConnor 1030 Carbon Fibre TripodArtist $30 day
(Cultural $40 day)
The 1030HD is designed to deliver the ultimate in control and stability for high definition productions with camera payloads up to 39.0 lbs (17.7 kg). It possesses the same characteristics as OConnor's fluid heads for 35mm film cameras, (such as the 2575) but with ultra-smooth true fluid drag specifically enhanced for high definition applications. Stepless sinusoidal counterbalance in conjunction with the sliding camera plate ensures fingertip control through the load range, and a tilt-locking pin positively locks the head for rapid, safe camera changes. Leaving no detail unrefined, dual pan arm rosettes facilitate left- or two-handed configurations, and are replaceable parts.
|
| | Ronford 150 Tripod Package (3)Artist $30 day
(Cultural $40 day)
Ronford Head with hard case, Mitchell adapter plate, tripod arm & extension tripod with soft case, Baby Legs with hard case.
Head S/N: 20002004-048
|
| | Ronin Handheld StabilizerArtist $50 day
(Cultural $100 day)
DJI Ronin Handheld Gimbal with Remote (work with the Dragon)
What's Included:
DJI Ronin 3-Axis Brushless Gimbal Stabilizer
Handlebar
Ronin Transmitter (Radio Controller)
Gimbal Tuning Stand
Smart Battery
Battery Charger
ANSI Power Cord
JIS Power Cord
CE Power Cord
SAA Plug Adapter
BS Plug Adapter
Micro USB Cable
Camera Mounting Plate
Extension Rod Holder
6 x Adjustable Length Extension Rod
2 x Camera Screw A
2 x Camera Screw B
2 x M4x10 Screw
Lens Support Screw
Lens Support
2 x Top Bar Quick Release Accessories Mount
Allen Wrench
Protective Case
Note: Requires 4 AA batteries (not supplied)
|
| | Ronin RS2 GimbalArtist $30 day
(Cultural $50 day)
DJI RS 2 is an advanced camera gimbal that stabilizes cameras for smooth, shake-free footage. Simply attach and balance your camera, then begin filming. DJI RS 2 integrates seamlessly with most cameras so you can access parameters and features directly on the device’s full-color touchscreen.
|
|
|
Ronin RS2 Gimbal Pro KitArtist $30 day
(Cultural $50 day)
DJI RS 2 is an advanced camera gimbal that stabilizes cameras for smooth, shake-free footage. Simply attach and balance your camera, then begin filming. DJI RS 2 integrates seamlessly with most cameras so you can access parameters and features directly on the device’s full-color touchscreen.
|
| | SHAPE HEAVY-DUTY TRIPOD DOLLYArtist $5 day
(Cultural $8 day)
Payload: 220 lbs – 100 Kg.
Rubber hooks to attach tripod legs.
360° rotation per wheel.
Adds 7” / 18 cm to tripod height.
Made of resistant aluminum.
Individual Wheel Brakes.
Folds for transport.
Lock security lever to fold / unfold.
|
| | | | |
|
Sachtler Speedlock 75CF tripod/FSB8 head Artist $20 day
(Cultural $25 day)
The Speed Lock CF is the fastest two stage tripod in the world! Simply release the three easy to reach clamps and the Speed Lock CF is ready for action. This extremely sturdy and twist-resistant carbon fiber tripod ensures that you’re already shooting while the others are still setting up.
The sturdy and reliable FSB 8 completes Sachtler's FSB-Range of 75mm heads, extending the payload range to 19.8 lbs (9 kg), well suited for (H)DV camcorders in industrial, newsgathering and education applications. The FSB 8 provides a 10-stage counterbalance, as well as five steps of drag (plus 0) for both tilt and pan. The fluid head is engineered with Sachtler's well-known technology, including its patented counterbalance switch mechanism, Speedbalance and Sideload technology, which allows quick mounting and unmounting of the camcorder for on-the-go assignments.
|
| | Shoulder Rig & Waist Support - DVTec
DV Rig Pro from DVTec
Shock absorbing bracket with waist support belt
Padded shoulder brace
Mounting point at back of shoulder for battery plate
Various mounting points along rig for ¼” screws to mount video monitoring/wireless feed/small light/microphone
|
| | Slider - 3' CinesSlider with Motor PodArtist $50 day
(Cultural $70 day)
The Kessler CineSlider™ is a robust, yet portable camera slider for rigs weighing up to 80 lbs. The 3' CineSlider 3 is a very portable solution to get quick and smooth dolly movements without having to transport a large dolly system. Best known for its drag control (much like drag on a fluid pan/tilt head), adjustable arc diameter crank handle and guarded side rails for the most versatility, this flagship product will handle anything you put on it.
|
| | SliderPlus V1XL - edelkroneArtist $20 day
(Cultural $30 day)
If you ever wonder how a “reveal shot” is created in video, there’s a chance that a camera slider may have been used. A reveal shot is where the camera travels left-to-right or right-to-left to reveal a portion of the scene. A slider is essentially a straight single or dual track with a movable “carriage” that glides across those tracks. The camera sits on top of the carriage and moves left-and-right (known as tracking), or front-and-back (known as dollying). These camera movements help create a more cinematic feel to a video.
https://www.edelkrone.com/us/p/138/slider-plus
|
|
|
| | Steady Cam Hybrid Pro with OperatorArtist $500 day
The details of the gear are : Steadicam Hybrid 3A/Pro with 3A arm (golden springs - up to 65lbs), Chrosziel Genio 2 Wireless Follow Focus
Contact the CSV office for details regarding the operator.
|
| | | | |
|
Tripod Dolly - Manfrotto 114 Heavy-Duty/CineArtist $5 day
(Cultural $10 day)
Heavy duty, super sturdy dollies designed for use with large still and video tripods
- large 127mm individually braked wheels with cable guards
- foldable for transporting.
|
| | Ergorig weight displacement system for DOPsArtist $40 day
(Cultural $75 day)
Ergorig is an innovative weight displacement system that saves the backs of camera operators without impeding camera movement. All Ergorig orders come with an embroidered set bag.
For sizing, measure from your front hip point to the top middle of your shoulder. If you're less than 20" order a short. Your front hip point is the part that feels like the tip of the triangle in your hip on the front side that is right around your belt line. Of course there's overlap between the two sizes, so if you're right at 20" either will work. The only difference between the two sizes is the length of the struts- the belt size is the same.
|
| |
