| | | | | | 4 x 4 RoadFlags II KitArtist $8 day
(Cultural $10 day)
Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter, RoadFlagsII offers a larger 4' x 4' (122cm x 122cm) surface lighting modification in a convenient, easy-to-use portable kit. The "slip-on" fabrics allow for fast setup and packaging while offering larger fabric sizes to create a multitude of lighting effects.
RoadFlagsII Kit packs into a lightweight, self-contained easy-to-handle 28" x 50" (71cm x 127cm) soft bag. RoadFlagsII Kit will easily pack into any automobile or location vehicle.
In addition to the list of fabrics included in a RoadFlagsII Kit, additional SLIP-ON light modification fabrics are available for RoadFlagsII and as instant recovers for standard 48"x48" frames. Now there is no need to return the frames to the factory for recovering.
Include in kit:
2 breakdown, easy-to-assemble 48"x48" (122cmx122cm) frames
fo single scrim
silk diffusion
silver lame reflector
solid shown
1 carrying bag
|
|
|
| | | | | | 8 x 8 Breakdown Frame with Ears Artist $10 day
(Cultural $15 day)
Modern's 8' x 8' breakdown frame comes complete with:
(4) 4' lengths of 1" Square Aluminum
(4) 4' lengths of 1" Square Aluminum with Male Pin
(4) Corners
(2) Sliding Ears
(2) Sleeves
Case
|
|
|
| | 8 x 8 Chromakey GreenscreenArtist $5 day
(Cultural $7.50 day)
This textile that is a darker shade of green and has a lower reflectance than digital green. Opaque.
|
| | | | 8 x 8 Egg Crate 50°Artist $10 day
The 50° Fabric Egg Crates are frame ready, with webbing, grommets, ties along all sides, and elastic on all four corners.
This 50° diffuser is the industry standard, when it comes to controlling soft light spread.
Please note: Frame is not included.
|
|
|
8 x 8 HighlightArtist $5 day
(Cultural $7.50 day)
This diffusion is a slip on that cuts the edge on direct light sources and does not diffuse as much as silks. 0.5 stops.
|
| | 8 x 8 Magic ClothArtist $5 day
(Cultural $7.50 day)
Magic Cloth® is a slip on that produces very well diffused, neutral light (not altering the color temp of source). This is especially effective with point sources. Magic Cloth® is a great diffusion for led lights as well!
|
| | 8 x 8 Poly Silk Artist $5 day
(Cultural $7.50 day)
Poly Silk, a.k.a. Artificial White Silk, is a slip on that diffuses direct light sources. 1.6 stops.
|
| | 8 x 8 Silent Full Grid ClothArtist $5 day
(Cultural $7.50 day)
Silent Full Grid Cloth is a slip on that diffuses direct light sources. 2.6 stops.
|
|
|
8 x 8 Silent Half Grid ClothArtist $5 day
(Cultural $7.50 day)
Silent 1/2 Grid Cloth is a slip on that diffuses direct light sources. 2 stops.
|
| | 8 x 8 Solid BlackArtist $5 day
(Cultural $7.50 day)
Slip on that blocks 100% of light. Opaque.
|
| | 8 x 8 Solid WhiteArtist $5 day
(Cultural $7.50 day)
This textile blocks 110% of light. Opaque.
|
| | 8 x 8 UltrabounceArtist $5 day
(Cultural $7.50 day)
Ultrabounce® is an opaque material that has a bright white soft bounce without hot spots on one side and black that creates negative fill on the other.
|
|
|
| | | | | | |
|
| | | | | | |
|
| | | | | | Baby PlateArtist $1 day
(Cultural $2 day)
Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Length: 3”
2 available
|
|
|
| | Baby Triple HeaderArtist $3 day
(Cultural $6 day)
Typically referred to as a "field goal post", this item allows the mouting of three monitors on to a 5/8" baby stand.
|
| | | | Babysitt'r Artist $1 day
(Cultural $2 day)
Matthews Babysitt'r securly and quickly mounts baby plates.
Features:
A universal system that works with any standard baby plate, from most known manufacturers.
Matthews, Avenger, American, Kupo, Impact
Standard does not exceed 3.6” x 6.0” (9.2 x 15.2cm)
Ideal for grips, gaffers and shooters that want to save time and space.
Two different plate slots to accommodate a wide range of plates or for dual plate applications.
Each BabySitt'r can still be used as a normal pancake/eighth apple
Spring loaded locking system
Dims per unit: 11.75” x 9.75” x 1”
|
|
|
| | | | | | |
|
Cardellini Clamp Artist $2 day
(Cultural $4 day)
See tips on appications of grip clamps here!
All Cardellini Clamps Feature:
• Rust-proof construction:
stainless steel shaft and bushing, aluminum jaws and knob.
• Patented Jaw design firmly grips almost any shape.
• Quick spin knobs reduce setting and release times.
• Jaw pads grip and protect the surface being clamped, and are easily replaceable in case of damage.
• Heavy threads on the shaft resist dinging.
• Standard clamps weigh only 20oz.
Uses:
• Strong, solid gripping of round, square, and rectangular tubing; 1x4 & 2x4 lumber, plywood, foam core, cards, etc.
• Firm but gentle holding of mirrors, glass, or fragile props.
• Mount lights to pipe, lumber, set walls, drop celing framework, car rigs, insert cars, etc.
• Mount gobo heads and c-stand arms.
• Brace cameras.
• Grab 2x4 or pipe for goal post.
• Use as a support pin on 4x4, 6x6, 12x12, or 20x20 frames.
• Use as a branch clamp
|
| | Cardellini Right-Angle Clamp Artist $2 day
(Cultural $4 day)
The hallmark of this Right-Angle Clamp by Cardellini is its design. This clamp features a Baby pin that is arranged perpendicularly to the main shaft, and that can be rotated and locked into eight positions incrementally separated by 45°.
Like other Cardellini clamps, this Right-Angle Clamp is made from aluminum and steel, and it features the same durable thread design which helps it resist dings and scratches that might otherwise impede smooth operation.
|
| | Clamp - Mini Matthellini Artist $2 day
(Cultural $4 day)
2" End Jaw, 1/4"-20 threaded female
The Matthews Mini Matthellini Clamp functions as a grabber for a flag or a small arm. It can also be used to mount a small light fixture to an existing arm.
Made of cast aluminum alloy with a chrome-plated 3/8" steel post for extra strength and minimum weight, the Mini Matthellini is perfect for tabletop photography, car interiors, and other confined spaces.
|
| | Cube tab Artist $0.50 day
(Cultural $0.75 day)
Grounded adaptor with 3 outlets.
|
|
|
Cucoloris 24x36 Artist $2 day
A cucoloris (a.k.a cookie) is used to project a shadow pattern.
|
| | | | | | |
|
| | | | | | |
|
| | | | Foam core fork (set of 2) Artist $0.50 day
(Cultural $1 day)
Four prong adapter used to go into foam core and terminate in a 3/8" pin.
|
| | |
|
| | | | | | |
|
Gel Kit - 48x48 CustomizableArtist $5 day
(Cultural $7.50 day)
Available gels:
(2) R3202 - Full Blue CTB
(2) R3204 - Half Blue CTB
(2) R3208 - Quarter Blue CTB
(3) R3408 - Roscosun 1/2 CTO
(1) R3315 - Tough 1/2 Plusgreen
(2) R3316 - Tough 1/4 Plusgreen
(2) R3313 Tough 1/2 Minusgreen
(2) R3314 Tough 1/4 Minusgreen
(1) R3026 - Tough White Diffusion
(1) R3027 - Tough 1/2 White Diffusion
(1) R117 - Tough 1/2 White Diffusion
(1) R3114 - UV filter
(1) LEE 210 - 0.6 ND
|
| | Gel Kit 20x24 Customizable Artist $5 day
(Cultural $7.50 day)
A range of colour correction, diffusion and accent colour gels tailer to your needs.
Please ask staff if you want specific gels
|
| | Grid clamp (Big Ben) with junior male pin Artist $2 day
(Cultural $4 day)
1-1/8"/2k male junior pin welded to a steel grid clamp. Works with 1-1/4" or 1-1/2" Schedule 40 aluminum Speed-Rail®. Also known as Big Ben.
|
| | |
|
| | Grip Head Kupo Lollipop w 1-1/8 stud & rec Artist $2 day
(Cultural $4 day)
The 4-1/2" Grip Head (or lollipop) consists of a pair of rotating aluminum discs attached to a junior 1-1/8" (28mm) stud and receiver. The discs have two different sized V shaped jaws to accept any accessory with a 5/8" or 3/8" mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. It uses a non-slip aluminum friction disc that will maintain its durability over time and offers the user positive locking strength and precise control. When you need to crank down on a large overhead frame to hold it in place this is the grip head for the job. It is designed to convert a junior stand with a combo head into an overhead stand.
|
| | Grip Stand + Single Arm Artist $3 day
(Cultural $3.75 day)
40" grip stand, available with Standar, Rocky Mountain or Turtle base.
|
| | |
|
Grip stand - KUPO 20ft max heavy duty Artist $10 day
(Cultural $15 day)
The High Roller Stand (can use with out rollers!) takes you higher and takes you mobile! Whether you are mounting a 10K Fresnel 14' (4.28m) in the air or you are flying a 20 x 20' (6.09 x 6.09m) Butterfly frame, this stand is ready to meet your needs. Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) and is equipped with braked casters to easily reposition heavy loads. Each caster is equipped with a peg that extends past the wheel allowing it to stand upright when collapsed. The High Roller Stand also features the triple function universal combo head with both 1-1/8" (28mm) and 5/8" (16mm) receivers plus a multi-direction 5/8" (16mm) stud to accept any kind of mounting challenge.
|
| | | | Junior Boom 5.6-10Artist $5 day
(Cultural $10 day)
The Matthews Junior Boom is largest and heaviest duty boom currently made by MSE. It measures 68" when collapsed, and extends to 10' (3.3 m). It has a Junior (1-1/8") mount and a 5/8" stud. A 25 lb counterweight is attached.
|
| | Junior receiver nail on plate Artist $2 day
(Cultural $4 day)
Plate used for mounting a light on the ground or on a wall. Terminates in a 6" long jr. (1-1/8"/2k) receiver. Typically referred to as a pigeon plate.
|
|
|
Light Stand - Medium Manfrotto Stackable Artist $2 day
(Cultural $3 day)
Features
Compact 4 section stand with 3 risers to support up to 9kg
Innovative stacking system for potability
Smooth air movement cushioning protects gear and fingers
Equipped with spigot and removable adapter for versatility
Extra wide 160cm footprint for complete stability
Weight
7 kg
Min Height
124 cm
Maximum Height
366 cm
|
| | Light Stand - Steel Medium Duty Artist $3 day
(Cultural $5 day)
These stands are compact and lightweight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings,' therefore permitting the use of heavier fixtures. Revenger stands feature a wider footprint for increased stability, beefed up leg braces, and a very low price. Ideal for students, studio or location.
|
| | Light Stand Small Artist $2 day
(Cultural $3 day)
Designed primarily for use in lighting kits, these stands are compact and lightweight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings,' therefore permitting the use of heavier fixtures. Revenger stands feature a wider footprint for increased stability and beefed up leg braces.
Maximum Height
82" (2083mm)
Minimum Height
26" (660mm)
Weight Capacity
17lbs (8kg)
Weight
3lbs (1kg)
Footprint
27" (686mm)
Folded Base
5" (127mm)
Folded Length
27" (690mm)
|
| | |
|
Light stand - heavy duty steel Artist $3 day
(Cultural $5 day)
Chrome plated steel stand. 4 sections, 3 risers. Ø: 35, 30, 25, 20mm. Leg: 20x20mm. 1 levelling leg.
SPECIFICATIONS
attachment 01
5/8 (16 mm) Spiggot not threaded
attachment number
16mm - 5/8 attachment type
color
silver
column tube diameter
35.30.25.20mm
maximum height
450 cm
minimum height
154 cm
closed height
136 cm
material
aluminum + steel
safety payload
9 kg
weight
9 kg
|
| | | | Mafer Clamp Artist $2 day
(Cultural $4 day)
Find out when and how to use a Maffer clamp here.
|
| | Magic Arm Artist $5 day
(Cultural $7 day)
floor tripod
camera adapter with 1/4-20 and 3/8 adapter
magic arm
|
|
|
| | Matthellini Clamp 6''Artist $2 day
(Cultural $4 day)
The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The threads end in a Baby (5/8") pin for mounting fixtures or other grip items.
|
| | | | |
|
| | | | | | |
|
| | | | Reflect Lighting System - KFlect Starter KitArtist $60 day
(Cultural $100 day)
KFLECT RLS components – used alone or in combination with other lighting tools – offer great flexibility in the design of mood lighting and a significant reduction of rigging time. The KFLECT RLS imitates nature: one light source (the sun) emits a beam that is in turn reflected, absorbed, diffused, coloured, etc by a variety of surfaces.
The best results are achieved using precise parallel light beams provided either by the sun or dedicated parabolic spotlights such as our K-Beams, with our K-Flectors. This combination enables accurate light distribution and offers plenty of flexibility to experiment with the shape and structure of light and shadow.
There is no end to the variety of effects that can be achieved using the wide range of K-Flectors. Depending on surface structure, the extremely efficient reflective quality ranges from 85% to 98% and enables multiple and combined light redirection. Thus, the beauty of natural light is fully maintained in the creative process of lighting.
Included:
K-BAG DoP
K-Flectors:
2x K-Flectors L (3, 12)
10x K-Flectors M (2, 3, 3 1/2, 4, 5, 8, 11, 13, 15, 17)
18x K-Flectors S (1, 2, 3, 3 1/2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17)
2x K-Flectors TT a (2, 16)
2x K-Flectors TT b (3, 3 1/2)
4x K-Flectors TT c (10, 12, 14, 16)
2x K-Flectors TT d (5, 7)
1x K-Flector TT e (6)
2x K-Flector TT S (BL,US)
2x K-Flector TT M (BL,US)
1x K-BOARD TT
K-Gripping Tools:
1x MAGBONE 43/6
1x MAGBONE 66/6
1x MAGBONE 66/16
1x MAGBONE 88/6
1x MAGBONE 88/16
1x MAGBALL TT 22/6
1x MAGBALL M 43/6
1x MAGBALL M 43/16
1x MAGBALL TT 22/25
1x MAGNECK 43/20
2x MAGNECK 25 HD
1x MAGNECK 30
1x MAGNECK 40
1x MAGNECK 50
2x SECUFLECT
|
| | |
|
| | | | Sky High Triple Riser ComboArtist $5 day
(Cultural $10 day)
A Stand with an attitude! Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Available with aluminum risers upon request. Will accept Matthews #366068 Combo Adapter Wheels. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.
Max Height: 183" (4648mm)
Min Height: 56" (1442mm)
Capacity: 50lbs (23kg)
Weight: 28lbs (13kg)
Footprint: 40" (1000mm)
Folded Base: 4.5" (114mm)
Features and Benefits:
Stainless steel helicoil inserts in riser castings.
V-shaped brass brakes ensuring 3-point strong contact.
Stay put T-handles wont fall out of riser castings.
Staight tracking, multi-direction locking, non-marking Tente casters. Best braking casters available.
Spring loaded rising knurled baby pin.
V-shaped positive lock junior reciever.
|
| | Slider Stand Matthews 46in
The Slider Stand meets the demand for a strong, wide-based stand with a low working height for those using camera sliders and Speed Rail/Pipe Dolly Systems.
The Slider Stand comes standard with two rocky mountain legs for easy leveling on hills, mountainsides, rocky environments, stairs and most other uneven terrain. As a comparison, the Slider Stand minimum working height measures one foot (30cm) lower than the standard low boy combo, giving the camera operator a POV range from hip to eye level.
Collapsed Height: 25" (64cm)
Maximum Height: 46" (116cm)
Junior (1-1/8") Receiver
Military Black Chrome Plated
Anodized Aerospace Inspired Designed Braces
Double Rocky Mountain Legs
|
|
|
| | | | WedgesArtist $3 day
(Cultural $6 day)
Set of 41 9"x3 3/8"x 1 1/2" wedges in a wooden crate
|
| | |
|
| | baby stand extender 8inchArtist $2 day
(Cultural $5 day)
Baby Stand Extension adds that little bit extra height to your light stands, baby plates or any other baby pin that needs extending. These super handy extensions will support anything you throw at them. These extensions can be added to the top of the stand, nail-on plate, or other hardware.
|
| |
